The Injector 26000 Push Pump System is designed for large ponds and lakes, where it aerates and circulates stagnant, low-oxygen areas. Drawing air from the surface via its flotation device, the injector blends air with lake water to produce a powerful aerated jet that helps circulate, oxygenate, and de-stratify the surrounding water.

This high-performance push pump is especially effective for moving water around islands or for helping break down organic waste introduced by streams, rivers, brooks, or springs. The oxygen-rich water can be further enhanced with beneficial bacteria to accelerate the digestion of organic material.

The Injector 26000 can circulate up to 26,000 litres of water per hour and influences a water zone of up to 250,000 litres (250 m³). Its angular, adjustable venturi mixer nozzle can be set to jet horizontally or angled upward or downward, depending on lake requirements.

Specifications:
• Water Flow Rate: 26,000 litres/hour
• Air Flow Rate: approx. 8,500 litres/hour
• Power Consumption: 440 watts (max.)
• Maximum Submersion Depth: 4 metres
• Cable Length: 10 metres
• Pump Guarantee: 5 years

The Injector 26000 Push Pump System includes the following:

 • OASE AquaMax Eco Expert 26000 Submersible Pump
 • 2" BSP Male to Female 90° Swivel Elbow
 • High Velocity Injector Nozzle
 • Submersible Pump Skid Stand (L67cm x W41cm x H22cm)
 • Injector Surface Float with Silencer (Ø23cm x H10cm)
 • 5m x 1" Internal Diameter Black Flexible Hose
 • 2 x SK19 Stainless Steel Hoseclips
 • Pack of 10 Heavy Duty Cable Ties

The skid stand can be filled with suitable ballast (such as pebbles or rocks), if needed—ballast not included. The skid raises the injector pump above the sludge layer on the lake bed. If the sludge layer exceeds 30 cm in depth, an additional Skid Riser can be supplied, or you may consider the alternative AquaAir 250 LM Floating Injector Aerator.