Nozzle Temperature:
250˚C – 270˚C

Printing Speed:
30mm/s – 50mm/s

Bed Temperature:
25˚C – 50˚C

Bed Surface:
Glass with glue

Cooling Fan:
OFF

Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters

Young’s Modulus:
2223 ± 199 Mpa

Tensile Strength:
66.2 ± 0.9 Mpa

Bending Strength:
97.0 ± 1.1 Mpa

Charpy Impact Strength:
9.6 ± 1.4 kJ/m2

Glass Transition Temperature:
67˚C

Vicat Softening Temperature:
180˚C

Melting Temperature:
190˚C

Drying Settings:
80˚C for 12h

Recommended Support Materials:
PolyDissolve™ S1

Other:
It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.
To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.
Annealing settings: 70˚C for 2h

When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.