Voltage Regulator; For Use With 12 Volt Battery Systems; 9.4 Volt To 14.4 Volt Output Operation; 200 Amp Output Current; 2 Wire Connection; Screw-On; 7.825 Inch Length x 4-3/4 Inch Width x 2-1/8 Inch Height

• Works With 12 Volt Battery Systems
• 200 Ampere Alternator Or Other DC Device
• Dedicated Alternator Port
• Simple 2 Wire Design Easy To Install
• Low And High Voltage Protection
• Perfect For Alternators, Wind Or Hydro Battery Applications
• Resets Once Current Is Within Operating Range
• Limited 3 Year Warranty

The AIMS Power battery voltage regulator and isolator protects batteries using solid state technology by automatically disconnecting a 12 Volt DC source when voltage is not safe or out of operating range. This product allows you to use different battery technologies in the same application and lithium batteries can be used in any application (alternators) because the regulator prevents the battery from over charging. Its compact and simple 2-wire terminal configuration allows for easy installation in common 2-wire 12 Volt applications: vehicle, wind, hydro or any other 12 Volt systems. The regulator continuously monitors the input voltage. If the voltage is within the operating range of 9.4 to 14.4 Volt, power will be supplied to the output terminal allowing power to the loads. If the voltage drops below 9.2 Volt or is over 14.6 Volt the power is cut off at the output terminal preventing power to the loads. The regulator also performs as an isolator by automatically disconnecting loads when the battery voltage is outside of operating range, protecting the main starting battery. Loaded with several safety features, the regulator will protect your batteries, while prolonging the overall life.

• Compatibility: 12 Volt Battery Systems
• With Wiring Harness: No
• Operating Voltage: 12 Volt