The Strong-Tie CS16 strap is a continuous utility strap that can be cut to length on the job site for maximum versatility. It comes packaged in a lightweight carton (about 40 lbs) for easy handling.
Installation:

• Use all specified fasteners.
• Wood shrinkage after strap installation across horizontal wood members may cause strap to buckle outward.
• Refer to the applicable code for minimum nail penetration and minimum wood edge and end distances.
• The table shows the maximum allowable loads and the nails required to obtain them.
• The cut length of the strap shall be equal to twice the "End Length" noted in the table plus the clear span dimension.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

California Residents: WARNING